Snom M5 DECT base station repeater
$1,300.00
-
Extending the range of your DECT solution
This wall mounted repeater increases the reception range of the M700 and M300 base stations, allowing for free movement between stations and for DECT calls to continue uninterrupted as the speaker moves around an area.
The M5 DECT Repeater is a simple and easy to deploy solution. It serves as a useful tool in locations requiring mobile coverage across several floors or throughout large buildings. The repeater increases the reception range of individual bases and handsets and bridges gaps between base stations, promoting free movement by creating a single, seamless network. The M5 repeater offers superior audio quality in both wideband and narrowband calls.
Quick summary
-
Support single and multi-cell
-
Increase the range without Ethernet
-
Wideband audio
-
Up to 5 simultaneous calls
-
Daisy chaining
-
允許無庫存下單
General Information
- Weight of repeater: approx. 126g
- Weight of power adapter: approx. 120g
- Dimensions: approx. (mm) 118x129x33 (WxHxD)
- Antenna diversity (two internal omni-directional antennas for better transmission and reception)
- Power: Power adapter 5,5 V 600 mA included
- Plugs: patented interchangeable clips, EU and US clip included, UK clip available optionally
- Color: black
User Interface
- LED indicator, two colors
- Reset key
Features
- 12 slots
- 2 simultaneous wideband calls
- 5 simultaneous narrowband calls
- Slot multiplexing
- Slot packing
- Full slot move over request
Range
- Indoors: Up to 50 meters
- Outdoors: Up to 300 meters
- (Repeater for indoor use only)
DECT
|
Standards Conformance
- EN 301406 (TBR6)
- EN 30176 – 2 (TBR10)
- EN 60950 – 1 (Safety)
- IEC60950 -1
- CSA c-CSA-us / UL60950 – 1
- EN 301489 (EMC, ESD)
- RF (EMF, SAR)
- FCC part 15D, conducted & radiated
- FCC part 15B
- RSS213
Installation
- Registration on DECT base
- Wall mounting
相關商品
-
IP Phone
Snom A210 WIFI USB-Stick
$450.00
加入購物車The Snom A210 WLAN-Adapter can transform every current Snom D3xx and D7xx phone into a WLAN device. WLAN functionality is increasingly becoming a frequent solution in offices where mobility and wireless connectivity is important.
To use Snom devices without getting tangled up in network cables, our customers previously had to install other manufacturers’ WLAN sticks. These were not specifically created or optimized for use with Snom phones resulting in some difficulties implementing them or in the worst case leading to network interruptions.
All that now belongs to the past thanks to the Snom A210 WLAN-Adapter. This small, easy to use adapter is simply plugged into the USB port of the Snom phone and can be configured quickly directly on the phone. As soon as it is connected with the local WLAN network all of the device’s features and functions can be used – just the same as a cable connection!
The Snom A210 WLAN-Adapter enables you to quickly, simply and cost-effectively set-up and use your Snom phone almost anywhere you want – even without a network connection.
Please note: Only use the current V10 Beta-Firmware to install the A210.
-
IP Phone
Snom D385
$2,050.00
加入購物車-
- High-resolution 4.3″ TFT-colour display
- Dedicated display for extension monitoring
- Up to 48 BLF keys (12 physical)
- Improved graphical user interface
- Wideband graphical user interface
- Wideband hands-free talking
- Digital Signal Processor (DSP) enhanced audio quality
- 2-port Gigabit Ethernet switch (RJ45) IEEE 802.3
- Power over Ethernet IEEE 802.3af, Class 3
- USB headset (1) ready
- D3 Expansion Module (1) ready
- Support for USB WiFi stick
- Electronic Hook Switch (EHS) (1) support for wireless headsets
- Built-in Bluetooth compatibility (not available on the D385N)
-
